High‐performance liquid chromatographic column packings with different particle sizes: Chromatographic behavior for the quality analysis of HuanglianShangqing pill

The chromatographic separation of traditional Chinese medicines is still a highly challenging task in analytical science with respect to its hundreds and thousands of chemical compounds, while increase of separation efficiency can greatly improve the separation power of chromatographic column for traditional Chinese medicine. In this study, 13 bioactive components in HuanglianShangqing pill were selected as an index to optimize the separation conditions and evaluate the system suitability of three commercially available columns packed with 1.8, 3.5, and 5.0 μm particles. The chromatographic separations were obtained by the most appropriate Eclipse Plus C₁₈ column (100 × 2.1 mm, 3.5 μm) within 45 min using gradient elution with aqueous‐ammonium acetate (10 mmol/L, pH 5.0) and acetonitrile, at a flow rate of 0.3 mL/min and an operating temperature of 30°C. The quality of HuanglianShangqing pill was assessed through combining simultaneous quantification of 13 compounds with fingerprint analysis. For the qualitative analysis, mass spectrometry was used to confirm the 13 compounds. All the validation data conformed to the acceptable requirements. For the fingerprint analysis, 32 peaks were selected as the common peaks at 254 nm to evaluate the similarities among HuanglianShangqing pills obtained from ten manufacturers.     

Overloading control of gas chromatographic systems

Increasing the interlaboratory reproducibility of gas chromatographic retention indices requires avoiding measurements distorted by overloading effects. Several criteria of evaluating the limits of the mass overloading of gas chromatographic systems are compared and reconsidered. The criteria mostly appropriate for practical purposes are based on (i) the dependences of factors of peak broadening (ratio of peak height and its width) vs. amount of analyte injected into the chromatographic column and (ii) the dependence of parameters characterizing the peak distortion (asymmetry factor) vs. the amount of analyte. Both these criteria provide mutually comparable evaluations of the overloading limits for analytes of different polarity. At the same time, the dependence of retention indices vs. amounts of analyte injected in the chromatographic column cannot be recommended for overloading control, because the parameters of the corresponding linear regressions indicate temperature dependence. The interpretation of certain gas chromatographic anomalies requires the correct evaluation of overloading limits. For example, the unusual temperature dependence of retention indices of polar analytes on non‐polar stationary phases and the dependence of retention indices on ratio of amounts of target analytes and reference compounds.     

Development of a method using high‐performance liquid chromatographic fingerprint and multi‐ingredients quantitative analysis for the quality control of Yangxinshi Pian

A simple and reliable method of high‐performance liquid chromatography with diode array detection method was developed for fingerprint analysis and simultaneous determination of six compounds including puerarin, salvianolic acid B, berberine hydrochloride, palmatine chloride, dehydrocorydaline, and icariin in the Chinese medicine preparation Yangxinshi Pian. The separation was performed on an Agilent Eclipse XDB‐C₁₈ reserved‐phase column (250 mm × 4.6mm I.D., 5 μm) using gradient elution with 50 mmol/L monopotassium phosphate aqueous solution and methanol as mobile phase at a flow rate of 1.0 mL/min. The column operating temperature was set at 30°C, and the detection wavelength was 280 nm. The method was validated by linearity, precision, accuracy, stability, and recovery. For fingerprint analysis, 25 peaks were selected as the common peaks, and four kinds of similarities including cosine similarity (S), ratio of similarity (S′), projection content similarity (C), and content similarity (P) were applied to evaluate the quality consistency of different batches of Yangxinshi Pian. The results showed that the developed method was an efficient tool for quality evaluation of Yangxinshi Pian.     

Desirability functions as response in a d‐optimal design for evaluating the extraction and purification steps of six tranquillizers and an anti‐adrenergic by liquid chromatography‐tandem mass spectrometry

Internal standards can be added at different stages of an analytical procedure. When they are added at the beginning of a multiresidue method and their behavior is not exactly the same as that of the analytes, the intended correction for small variations within the analytical process could not be achieved. Because of this, in the present work, the use of d ‐optimal designs together with desirability functions is proposed to state the experimental response under study. The overall desirability function used relates two analytical criteria: to assess a similar chemical behavior of each analyte in relation to its internal standard and to avoid a significant reduction of the absolute peak area of the internal standards. This strategy has been applied to the analysis of the effect of four factors related to the extraction and purification steps of six tranquillizers and a β‐blocker from pig muscle analyzed by liquid chromatography–tandem mass spectrometry. The effect of those factors has been evaluated by means of an ad hoc d ‐optimal design consisting of only 11 experiments. The resulting levels of the four factors that enable to achieve the greatest overall desirability have also been compared with those obtained when either the standardized or absolute peak area has been considered as response. Differences in both the significant factors and their optimum levels have been observed. It is noticeable that the experimental effort necessary to study the effect of the factors has been reduced by more than 50% thanks to the d ‐optimal design. Copyright © 2015 John Wiley & Sons, Ltd.     

An ultra-wideband coding polarizer for beam control and RCS reduction

Pancharatnam−Berry (PB) phase metasurface, as a special class of gradient metasurfaces, has been paid much attention owing to the robust performance for phase control of circularly polarized waves. Herein, we present an element-based polarizer for the first step, which enables the incident electromagnetic waves into the cross-polarized waves with the relative bandwidth of 71%, and the polarization conversion ratio exceeds 90% at 6.9−14.5 GHz. Then an eight-elements coding polarizer based on the PB phase is presented for the applications on beam control and radar cross section reduction. The simulated values indicate that the reduction of radar cross section is more than 10 dB at 6−16 GHz. Our work reveals the availability of manipulating the waves, beamforming in communication systems and electromagnetic stealth, and so on.     

显化反应条件视角 发展反应调控意识——受控的燃烧

以波义耳研究燃烧的史实为背景,创新设计燃烧条件的探究实验,并提出“条件叠加式”燃烧条件探究新思路。以“燃灭控”为主线,一以贯之地显性化“条件是认识化学反应的一种基本视角”,落实“在一定条件下通过化学反应可以实现物质转化”的化学观念。基于调控化学反应思想创新设计“燃旺弱灭”反应控制视域,统整开展“情境”“活动”与“任务”三位一体的学习活动。重置教材实验的教学价值取向,结合燃烧的形式美、汉语言文字解读,将化学学科知识与美育、汉语言文化领域跨领域融合。     

二维纳米材料的改性及其环境污染物治理方面的应用

二维纳米材料是一类具有类似二维平面形态,且厚度在纳米级甚至数个原子层的材料,其种类繁多并且具有很多与体相材料不同的物化性质,在众多领域受到了广泛关注。二维纳米材料在催化降解、吸脱附、过滤、传感检测等领域具有可观的应用潜力,还可用于环境污染的防治。通过形貌、元素、基团、缺陷的修饰、改性和材料合成等策略可以调控二维纳米材料的性质,从而研发新的材料体系或者改善二维纳米材料的性能。本文首先归纳了二维纳米材料的种类,并重点阐述了各种改性策略的作用及研究现状,以及改性的二维纳米材料在治理水体污染、大气污染和污染物检测等方面的应用,为二维纳米材料在环境治理领域的发展现状作了系统介绍和展望。     

Pesticidal potential of some wild plant essential oils against grain pests Tribolium castaneum (Herbst, 1797) and Aspergillus flavus (Link, 1809)

The red flour beetle, Tribolium castaneum, and the mold Aspergillus flavus are well known threats of stored grain commodities, causing nutritional loss and poisoning of stored products, respectively. T. castaneum has developed resistance against most insecticides, leading to the use of extensive amounts of synthetic insecticides to protect stored grains. Synthetic pesticides not only toxify the environment but also cause serious health issues in humans using pesticide treated grains. This study aimed to identify plant-based natural pesticides to control T. castaneum and A. flavus. Essential oils were extracted from fresh aerial parts of Chenopodium ambrosioides, Conyza sumatrensis, Erigeron canadensis, and Tagetes minuta through steam distillation and investigated for insecticidal and anti-fungal activities against adult T. castaneum and A. flavus, respectively. GC–MS analysis of C. sumatrensis revealed the presence of 37.7% cis-lachnophyllum ester, 13.4% germacrene D, and 21.6% limonene, whereas in E. canadensis the major compounds were limonene, germacrene D, and cis-lachnophyllum ester (43.4%, 12.9% and 5.9%, respectively). In bioassays with treated grain, C. sumatrensis and E. canadensis essential oils exhibited excellent toxicity against adult T. castaneum with LD₅₀ of 3.7 and 5.6 mg per 10 g grains whereas in a fumigation bioassay they showed LD₅₀ of 6.6 and 10.6 mg/L, respectively. The essential oils extracted from C. ambrosioides and E. canadensis exhibited good anti-fungal activity against A. flavus. Our findings suggest that essential oils of C. sumatrensis and E. canadensis can play an important role in protecting stored grains from T. castaneum and A. flavus contamination.     

Fabrication and characteristics of self‐aggregation nanoparticles used for conformance control treatment

In order to alleviate the contradiction between injectability of the profile control agent and its profile control performance, a novel core‐shell heterogeneous structure colloidal particles (CSA) were synthesized, and the mechanism of self‐aggregation plugging was proposed. Cross‐linking inside the nanoparticles and chain‐growth polymerization via capturing acrylamide in the aqueous phase result in the formation of core‐shell heterogeneous structures as proved by TEM observation and XPS analysis. Moreover, CSA nanoparticles exhibit good hydrophilic properties, outstanding thermal stability and limited expansion capacity. Effects of different metal cations and surface group on the self‐aggregation time of CSA nanoparticles were systematically studied. Results showed that divalent cations contributed to more significant aggregation of CSA nanoparticles in comparison to monovalent cations. The increasing cations concentration and valency decreased the thickness of electric double layer, which lead to a decrease in the zeta potential. Core flooding test shows that the injection of nanoparticles which diameter is much smaller that of pore‐throats into the target reservoir can not only successfully enter the depth of porous media, but also effectively block the high permeability areas by the formation of self‐aggregation particle clusters. This study provides a new method for the equilibrium between nanoparticles injectivity and in‐depth profile control of nanoparticles.